10 Crestway, Tarleton GB-Preston PR4 6BE Tel: +44 (0) 1494 465 166
heat recovery unit & systems at exodraft

Jalousien Klappe DM

Application


The exodraft Damper Motor is used in exodraft exhaust system solutions for the protection or control of inflow of hot flue gas to Basic Plate heat recovery devices. A damper motor is used primarily for larger boiler systems, industrial processing plants, or commercial systems.
All parts in contact with flue gas are made from stainless steel EN 1.4404. All exterior parts are made from stainless steel EN 1.4301. An integrated electric motor opens and closes the flue.Two types: on/off or modulating motor. Power supply and start/stop signal come from an external exodraft control, and thus is not part of the Damper Motor. The Damper Motor has a safety feature causing it to enter safety mode automatically in case of power failure.

Limitations

  • Max. temperatur 600°C.
  • The Damper Motor is not to be used as a draining point in an exhaust system.
  • As a rule, the Damper Motor is only for indoor installation.
  • Installation outside requires extra shielding.
  • Flue gas / process air must be of a quality (particle free) that will not, over time, cause the
    damper to be filled with residue that can affect the function of the damper.

PRODUCT OVERVIEW

  • DM350


    CLOSE / OPEN function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 350.5 mm; Outlet (Muffle) 351.2 mm.
  • DM350-M


    Modular function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 350.5 mm; Outlet (Muffle) 351.2 mm.
  • DM400


    CLOSE / OPEN function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 400.5 mm; Outlet (sleeve) 401.2 mm.
  • DM400-M


    Modular function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 400.5 mm; Outlet (sleeve) 401.2 mm.
  • DM500


    CLOSE / OPEN function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 500.5 mm; Output (sleeve) 501.2 mm.
  • DM500-M


    Modular function with motor control. Suitable for exhaust temperature up to 600 ° C. Input (tip end) 500.5 mm; Output (sleeve) 501.2 mm.

Accessories

  • Help Contact

    Auxiliary contact for bypass motors
Technical Data
Bypass-Motor Type Power Connection Power consumption (standby) Weight
DM350 NFA 10Nm 1 x AC24...240V, 50/60Hz /DC24...125V 6 (2,5) W 62 kg
DM350-M NF25A-SZ 10Nm 1 x AC24, 50/60Hz /DC24 V 3,5 (2,5) W 62 kg
DM400 NFA 10Nm 1 x AC24...240V, 50/60Hz /DC24...125V 6 (2,5) W 60 kg
DM400-M NF25A-SZ 10Nm AC24, 50/60Hz /DC24 V 3,5 (2,5) W 60 kg
DM500 NFA 10Nm 1 x AC24...240V, 50/60Hz /DC24...125V 6 (2,5) W 58 kg
DM500-M NF25A-SZ 10Nm AC24, 50/60Hz /DC24 V 3,5 (2,5) W 58 kg

Download Product Information